Schwarze und Rote Limitierte Clogger Zero Chainsaw Hose Gen2

Schwarz-Rot Limitierte Clogger Zero Chainsaw Hose Gen2 – Exklusives Outdoor-Schuhwerk.

"Dieses Meisterwerk aus feinstem Leinen, gefertigt von Hand, entführt dich in eine Welt aus purer Leichtigkeit und unvergleichlichem Komfort. Trage es und spüre, wie die Sonne auf deiner Haut tanzt, während du die Stille und Schönheit des Augenblicks genießt. Ein Hauch von Vintage, ein Versprechen von Luxus – dieses Kleid ist mehr als nur Stoff, es ist eine Geschichte, die du tragen wirst."

€127.58 €255.15

Size:

XXL

XXS

XXXL

Leg Length:

Regular Leg

Short Leg

Tall Leg

Anzahl:

Beschreibung

Light and cool chainsaw pants for peak performance in Australia’s hot conditions. Tough to handle the knocks that an arborist will throw at them.

CERTIFICATIONS:Certified by Bureau Veritas NZ Ltd to the Australian and New Zealand standard, AS/NZS 4453.3:1997 (20 m/s chainspeed).

Fit & Sizing:Slim fit with plenty of stretch for easy movement. Extra leg length to allow for lift while climbing. See the sizing chart for jean-equivalent sizes.

Clogger Zero Gen2 Light and Cool Men's Chainsaw Pants Size Chart

Note 1: IMPORTANT Our climbing pants across Tall, Standard and Short, all include an additional 6cms/2.5 inches of length to allow for lift from the harness and knee flex/bending while climbing.

Note 2: These garments are designed to be 'mid-rise', i.e. the top of the waistband will sit on the top of the hips, not as high as the natural waist.

Fits Top of Hip Range
Size	CM	IN
2XS	71-77	28-30
XS	78-83	30.5-32.5
S	84-89	33-35
M	90-95	35.5-37.5
L	96-101	38-40
XL	102-107	40-42
2XL	108-113	43-45
3XL	114-119	45-47

Standard- Fits Person With Inleg Length
Size	CM	IN
2XS	76.5	30
XS	78	31
S	79.5	31
M	80.5	32
L	81.5	32
XL	82.5	32.5
2XL	82.5	32.5
3XL	82.5	32.5

Short- Fits Person With Inleg Length
Size	CM	IN
2XS	70.5	27.5
XS	72	28
S	73.5	29
M	74.5	29
L	75.5	30
XL	76.5	30
2XL	76.5	30
3XL	76.5	30

Tall- Fits Person With Inleg Length
Size	CM	IN
2XS	82.5	32
XS	84	33
S	85.5	33.5
M	86.5	34
L	87.5	34.5
XL	88.5	35
2XL	88.5	35
3XL	88.5	35

Approx Jeans Equivalent Waist Size
Size	CM	IN
2XS	69	27
XS	75	30
S	81	32
M	87	35
L	93	37
XL	99	39
2XL	105	42
3XL	111	44

Cooling features include two high efficiency fixed side vents with an open leg design for maximum air flow. The incredibly breathable outer incorporates Nilit® Breeze fibers to wick heat from the body.

Staying cool is also about reducing effort while working. The Zero chainsaw pant outer shell offers 140% 4-way stretch for maximum flex with ultra low weight at just under 1kg (Medium).

The outer is a high tenacity nylon ripstop. The super tough Dyneema fabric on the right calf increases durability where the hanging chainsaw causes premature wear. Upgraded zippers and FlexZone in the seat seam for extra give.

All this is delivered while improving safety performance. Light weight does not mean less safe.

These are chainsaw pants for those that want to be their best.

Chainsaw protection

Uses Clogger's exclusive Arrestex HP chainsaw fabric which is light and breathable with 6 layers of advanced technical chainsaw protection.
Arrestex HP includes ultra strong UHMWPE cut resistant fibers cross woven to improve multi-directional strike performance.
Waist to ankle coverage with extra coverage on the left side to allow for movement if a chainsaw strikes.

Outer construction and design

The outer fabric incorporates NILIT BREEZE® to lower body temperature by dispersing body heat and moisture.
High-tenacity high vis orange polyester outer with 4-way stretch fabric for greater freedom of movement and flexibility with FlexZone in the seat seam for extra give.
Abrasion resistant fabric over the knee, the inside of the calf and ankle areas increasing the durability in these high wear areas.
Ultra-high tear strength Dyneema fabric at the right calf to protect against small cuts caused by the chainsaw when hanging off the harness.
Elasticized waist for a snug fit and extra comfort.
Lock stitched seams and reinforced stress points.

Tree people specific detail

Tough, large cross flow mesh side vents for maximum cooling.
2 zipped hip pockets; 2 zipped thigh pockets individually sewn to be able to remove saw dust with an additional pocket on the left thigh. Lower pockets are all accessible while wearing a harness.
Strong, durable zippers with a better seal to reduce the risk of sawdust damage.
Special zipper pulls on the pockets to make accessing your pockets easy even when wearing gloves.
Boot hooks made from durable plastic construction that has been reversed to prevent snagging on throw lines all while still securely holding pants in place when climbing.
Wide belt loops to fit up to a 50mm belt.
Mesh lining for enhanced breathability.
Opening at hems to remove debris.
High visibility panels front and rear.

Produktdetails

Schwarz-Rot Limitierte Clogger Zero Chainsaw Hose Gen2 – Exklusives Outdoor-Schuhwerk.

Clogger Zero Gen2 Light and Cool Men's Chainsaw Pants Size Chart

Clogger Zero Gen2 Light and Cool Men's Chainsaw Pants- Hi Vis Orange - Front + 360 Calf Protection.

Clogger Zero Ultra

Schwarz-Rot Limitierte Clogger Zero Chainsaw Hose Gen2 – Exklusives Outdoor-Schuhwerk.

PANT – GREY GLADIATOR C/P CLASS 1 TYPEA

PFANNER ARBORIST Kettensäge Typ A: Baumkletter-Power für Profis - EN 381-5 geprüft!

KEPROTEC PFANNER® LIGHT CHAINSAW PANT – Rot, Robust, Professionell!

Pink Limited Edition Clogger Zero Chainsaw Pants Gen2